我在windows下面能make成功，但是在linux下面失败。 具体是
Makefile:161: recipe for target 'build/main.o' failed
为啥呀，我makefile的161行如下
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
搜了一轮没结果，看来linux水太深了。
再次编辑一下，我在github上面下载相关的stm32 ubuntu makefile工程文件，然后自己尝试make一下，全部都出现同样的问题，是不少我的make有问题啊 再附上我的makefile：
TARGET = LEDtest
DEBUG = 1
# optimization
OPT = -Og
BUILD_DIR = build
C_SOURCES = \
Core/Src/main.c \
Core/Src/gpio.c \
Core/Src/stm32f1xx_it.c \
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_gpio.c \
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_pwr.c \
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_exti.c \
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_rcc.c \
Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_utils.c \
Core/Src/system_stm32f1xx.c
# ASM sources
ASM_SOURCES = \
startup_stm32f103xe.s
PREFIX = arm-none-eabi-
# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
# either it can be added to the PATH environment variable.
ifdef GCC_PATH
CC = $(GCC_PATH)/$(PREFIX)gcc
AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
CP = $(GCC_PATH)/$(PREFIX)objcopy
SZ = $(GCC_PATH)/$(PREFIX)size
else
CC = $(PREFIX)gcc
AS = $(PREFIX)gcc -x assembler-with-cpp
CP = $(PREFIX)objcopy
SZ = $(PREFIX)size
endif
HEX = $(CP) -O ihex
BIN = $(CP) -O binary -S
CPU = -mcpu=cortex-m3
# fpu
# NONE for Cortex-M0/M0+/M3
# float-abi
# mcu
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
# macros for gcc
# AS defines
AS_DEFS =
# C defines
C_DEFS = \
-DUSE_FULL_LL_DRIVER \
-DHSE_VALUE=8000000 \
-DHSE_STARTUP_TIMEOUT=100 \
-DLSE_STARTUP_TIMEOUT=5000 \
-DLSE_VALUE=32768 \
-DHSI_VALUE=8000000 \
-DLSI_VALUE=40000 \
-DVDD_VALUE=3300 \
-DPREFETCH_ENABLE=1 \
-DSTM32F103xE
# AS includes
AS_INCLUDES =
# C includes
C_INCLUDES = \
-ICore/Inc \
-IDrivers/STM32F1xx_HAL_Driver/Inc \
-IDrivers/CMSIS/Device/ST/STM32F1xx/Include \
-IDrivers/CMSIS/Include \
-IDrivers/CMSIS/Include
# compile gcc flags
ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
ifeq ($(DEBUG), 1)
CFLAGS += -g -gdwarf-2
endif
CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
LDSCRIPT = STM32F103RCTx_FLASH.ld
# libraries
LIBS = -lc -lm -lnosys
LIBDIR =
LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
# default action: build all
all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
vpath %.c $(sort $(dir $(C_SOURCES)))
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
vpath %.s $(sort $(dir $(ASM_SOURCES)))
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
$(AS) -c $(CFLAGS) $< -o $@
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
$(CC) $(OBJECTS) $(LDFLAGS) -o $@
$(SZ) $@
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
$(HEX) $< $@
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
$(BIN) $< $@
$(BUILD_DIR):
mkdir $@
clean:
-rm -fR $(BUILD_DIR)
-include $(wildcard $(BUILD_DIR)/*.d)
不都是sudo apt-get install make 这个玩意吗，或者说自带的make命令